Belt Driven
Products > Centrifugal
Our belt-driven centrifugal fans are manufactured in carbon steel which is protected from corrosion by cataphoresis painting with two-component polyurethane enamel RAL 7045. Our stand arrangements are as follows:
• Arrangement 1: Fan coupling with belts. Support mounted on seat outside the air circuit. Bare shaft without transmission and without motor. Maximum air temperature 100 ° C. With cooling fan up to 300 ° C.
• Arrangement 9: Fan coupling with belts. Support and transmission mounted on seats outside the air circuit. Motor supported by a flag fixed on the side of the chair. Maximum air temperature 100 ° C. With cooling fan up to 300 ° C.
• Arrangement 12: Fan coupling with belts. Support and transmission mounted on seats outside the air circuit. Motor and fan supported by a foundation frame. Maximum air temperature 100 ° C. With cooling fan up to 300 ° C.
Our standard motors in 2, 4, 6 pole high efficiency motors with three-phase 230 / 400V 50Hz power supply up to size 132 and 400 / 690V 50Hz for larger sizes. Degree of protection IP55, class F. The motor speed is chosen based on the calculation of the transmission.
On request we can also offer the following:
• Special design with different construction materials.
• 60Hz version.
• Painting with RAL different from the standard.
• Static parts of the fan hot-dip galvanized.
• Solutions with corrosion resistant materials.
• Version with wear-resistant materials.
• Electric motors for special applications.
• Electric motors suitable for VSD.
• Possibility of configuration with various accessories including: Anti-vibration joints, inspection hatch, drain plug, shock absorbers, protection nets, filter, silencer, flow regulator, valves and dampers.
• Airtight constructions.
• Insulation.
ART-N
Specifications: V = 0,1 ÷ 60 m3/s Pt = 1000 ÷ 20000 Pa
Industrial fan/ industrial blower: For the pneumatic conveyance of dust laden air, with the exclusion of fibrous materials.
Impellers with backward curved blades.
Suitable for pneumatic conveyance of air, including sawdust and short wooden chips; it is characterized by an high efficiency.
Particularly used in drying systems, forced draughts, glassworks, mill and marble industries. This series is paritucaly suitable for the glassworks industry and used as combustion air and cooling fans for the furnace area, exhaust fans, recovery systems, and recirculation fans during the process of forming the glass as well as mold cooling and air staging. The furnace is required to be equipped with proper cooling and combustion equipment whilst exhausts and fresh air are necessary to provide for the comfort of operators. The process of glass production uses fans for tempering of glass. To complete a specific set of surface properties, it needs the high-temperature sheets of glass and metal to be exposed to high-velocity ambient air from glass blowers. During the part of a continuous operation, the air is typically filtered and directed onto the hot surface. There are numerous steps of air jets which are directed at the quenched surface as long as the requisite surface temperature is accomplished. As the air is a poor heat transfer medium, the air-quench tempering blowers can considerably demand the air and horsepower. Therefore, the highest efficiency metal or glass tempering blowers are applied for this application.
FQ-N
Specifications: V = 0,2 ÷ 60 m3/s Pt = 700 ÷ 8000 Pa
Industrial fan/ industrial blower: For the coveyance of clean of light dusty air. The impellers have backward curved blades with an high fluid dynamic efficiency at low noise level.
Suitable for all applications with medium-high capacity and medium-high pressure at the same time.
Particularly used in suction, flues extraction, drying systems and material conveyance on suction.
Ferrari Industrial fan FQ series are suitable for dedusting and filtering industry. With a full line of mechanical dust collectors and filter systems, Ferrari industrial filtering fans are designed for clean air to control and eliminate massive particle load from entering into the airstream. Ferrari Industrial dedusting fans are applied for exhausting clean filtered air out of the system whether there is sawdust, metal scraps, or welding smoke.
FR-N
Specifications: V = 0,15 ÷ 110 m3/s Pt = 50 ÷ 3500 Pa
Industrial fan/ industrial blower: For the conveyance of clean of light dusty air. High efficiency impellers with backward curved blades. Suitable for high capacity at low pressure.
Particularly used in civil and industrial conditioning systems, ceramic and brick drying sytems, cereal storage bins aeration, warehouses, painting systems, tanks with solvents.
MEC-N
Specifications: V = 0,2 ÷ 60 m3/s Pt = 700 ÷ 5000 Pa
Industrial fan/ industrial blower: For the pneumatic conveyance of dust laden air. Closed impellers with backward curved blades.
Suitable for all applications where the flow through the fan consists of solid material of small-medium dimensions, with the exclusion of fibrous materials.
Particularly used for the conveyance of sawdust, short wooden chips and plastic materials but also suction, fumes extraction, drying system and chemical plants.
VCM-N
Specifications: V = 0,1 ÷ 60 m3/s Pt = 1000 ÷ 20000 Pa
Industrial fan/ industrial blower: For the pneumatic conveyance of dust laden air, with the exclusion of fibrous materials.
Impellers with backward curved blades.
Suitable for pneumatic conveyance of air, including sawdust and short wooden chips; it is characterized by an high efficiency.
Particularly used in drying systems, forced draughts, glassworks, mill and marble industries. This series is paritucaly suitable for the glassworks industry and used as combustion air and cooling fans for the furnace area, exhaust fans, recovery systems, and recirculation fans during the process of forming the glass as well as mold cooling and air staging. The furnace is required to be equipped with proper cooling and combustion equipment whilst exhausts and fresh air are necessary to provide for the comfort of operators. The process of glass production uses fans for tempering of glass. To complete a specific set of surface properties, it needs the high-temperature sheets of glass and metal to be exposed to high-velocity ambient air from glass blowers. During the part of a continuous operation, the air is typically filtered and directed onto the hot surface. There are numerous steps of air jets which are directed at the quenched surface as long as the requisite surface temperature is accomplished. As the air is a poor heat transfer medium, the air-quench tempering blowers can considerably demand the air and horsepower. Therefore, the highest efficiency metal or glass tempering blowers are applied for this application.
FC-N
Specifications: V = 0,02 ÷ 10 m3/s Pt = 1000 ÷ 22000 Pa
Industrial fan/ industrial blower: For the conveyance of fluids, even very dirty, at high pressure.
Impellers with forward positive blades except for FA serie which is with radial blades. Suitable for all applications with an high ratio between developed pressure and flow rate.
Suitable for conditioning, suction, drying system, pressurizing, pneumatic conveyance and forced draughts.
For the cement industry, Ferrari high pressure cement industry fan FC, FE, FG/P series, provides cement fans which play a key role in extremely heating the meal into the cement clinker and then to cool the clinker with id fans in the cement plant. The clinker then has gypsum and fly ash added and is moved into the cement mill to be ground into the final product. Rocks crushing process utilises these fans series in cement plants for dedusting and air filtration
FE-N
Specifications: V = 0,02 ÷ 10 m3/s Pt = 1000 ÷ 22000 Pa
Industrial fan/ industrial blower: For the conveyance of fluids, even very dirty, at high pressure.
Impellers with forward positive blades except for FA serie which is with radial blades. Suitable for all applications with an high ratio between developed pressure and flow rate.
Suitable for conditioning, suction, drying system, pressurizing, pneumatic conveyance and forced draughts.
For the cement industry, Ferrari high pressure cement industry fan FC, FE, FG/P series, provides cement fans which play a key role in extremely heating the meal into the cement clinker and then to cool the clinker with id fans in the cement plant. The clinker then has gypsum and fly ash added and is moved into the cement mill to be ground into the final product. Rocks crushing process utilises these fans series in cement plants for dedusting and air filtration
FG-N
Specifications: V = 0,02 ÷ 10 m3/s Pt = 1000 ÷ 22000 Pa
Industrial fan/ industrial blower: For the conveyance of fluids, even very dirty, at high pressure.
Impellers with forward positive blades except for FA serie which is with radial blades. Suitable for all applications with an high ratio between developed pressure and flow rate.
Suitable for conditioning, suction, drying system, pressurizing, pneumatic conveyance and forced draughts.
For the cement industry, Ferrari high pressure cement industry fan FC, FE, FG/P series, provides cement fans which play a key role in extremely heating the meal into the cement clinker and then to cool the clinker with id fans in the cement plant. The clinker then has gypsum and fly ash added and is moved into the cement mill to be ground into the final product. Rocks crushing process utilises these fans series in cement plants for dedusting and air filtration
FI-N
Specifications: V = 0,02 ÷ 10 m3/s Pt = 1000 ÷ 22000 Pa
Industrial fan/ industrial blower: For the conveyance of fluids, even very dirty, at high pressure.
Impellers with forward positive blades except for FA serie which is with radial blades. Suitable for all applications with an high ratio between developed pressure and flow rate.
Suitable for conditioning, suction, drying system, pressurizing, pneumatic conveyance and forced draughts.
For the cement industry, Ferrari high pressure cement industry fan FC, FE, FG/P series, provides cement fans which play a key role in extremely heating the meal into the cement clinker and then to cool the clinker with id fans in the cement plant. The clinker then has gypsum and fly ash added and is moved into the cement mill to be ground into the final product. Rocks crushing process utilises these fans series in cement plants for dedusting and air filtration
FP-N
Specifications: V = 0,02 ÷ 10 m3/s Pt = 1000 ÷ 22000 Pa
Industrial fan/ industrial blower: For the conveyance of fluids, even very dirty, at high pressure.
Impellers with forward positive blades except for FA serie which is with radial blades. Suitable for all applications with an high ratio between developed pressure and flow rate.
Suitable for conditioning, suction, drying system, pressurizing, pneumatic conveyance and forced draughts.
For the cement industry, Ferrari high pressure cement industry fan FC, FE, FG/P series, provides cement fans which play a key role in extremely heating the meal into the cement clinker and then to cool the clinker with id fans in the cement plant. The clinker then has gypsum and fly ash added and is moved into the cement mill to be ground into the final product. Rocks crushing process utilises these fans series in cement plants for dedusting and air filtration
FA-R
Specifications: V = 0,02 ÷ 10 m3/s Pt = 1000 ÷ 22000 Pa
Industrial fan/ industrial blower: For the conveyance of fluids, even very dirty, at high pressure.
Impellers with forward positive blades except for FA serie which is with radial blades. Suitable for all applications with an high ratio between developed pressure and flow rate.
Suitable for conditioning, suction, drying system, pressurizing, pneumatic conveyance and forced draughts.
For the cement industry, Ferrari high pressure cement industry fan FC, FE, FG/P series, provides cement fans which play a key role in extremely heating the meal into the cement clinker and then to cool the clinker with id fans in the cement plant. The clinker then has gypsum and fly ash added and is moved into the cement mill to be ground into the final product. Rocks crushing process utilises these fans series in cement plants for dedusting and air filtration
DFR
Specifications: V = 1,5 ÷ 550 m3/s Pt = 160 ÷ 8000 Pa
Industrial fan/ industrial blower: For the conveyance of clean or light dusty air.
The impellers are double inlet type, with high efficiency backward curved blades. Suitable for all applications with high capacity against medium-high pressure.
Particularly used in civil and industrial conditioning systems, ceramic and brick drying sytems, cereal storage bins aeration, warehouses, painting systems, intake from textile sector plants.
DFM
Specifications: V = 1,5 ÷ 550 m3/s Pt = 160 ÷ 8000 Pa
Industrial fan/ industrial blower: For the conveyance of clean or light dusty air.
The impellers are double inlet type, with high efficiency backward curved blades. Suitable for all applications with high capacity against medium-high pressure.
Particularly used in civil and industrial conditioning systems, ceramic and brick drying sytems, cereal storage bins aeration, warehouses, painting systems, intake from textile sector plants.